TeLINK
Communications Interface Devices
CEPL130343 TeLINK
Date Last Saved: 8/30/2005 11:04:32 AM
|
Product Name(s):
|
TeLINK
|
|
Product Description:
|
Serves as an interface between a Carrier Comfort Network and a telecommunications network.
|
|
Product Application(s):
|
Can be used with a modem to enable the Carrier Comfort Network to communicate over telephone lines with other similarly equipped Carrier Comfort Networks. The telephone connection allows the two networks to communicate as though they were connected directly.
|
|
|
Point Quantity
|
Characteristics
|
|
Analog Input (AI):
|
N.A.
|
N.A.
|
|
Digital Input (DI):
|
N.A.
|
N.A.
|
|
Universal Input (AI or DI):
|
N.A.
|
N.A.
|
|
Analog Output (AO):
|
N.A.
|
N.A.
|
|
Digital Output (DO):
|
N.A.
|
N.A.
|
|
Universal Output (UO):
|
N.A.
|
N.A.
|
|
Other:
|
N.A.
|
N.A.
|
|
|
|
A/D Converter Resolution
|
|
|
D/A Converter Resolution
|
|
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
|
|
|
Indicating status LED on each output?
|
|
|
Integral Flow Sensor?
|
N.A.
|
|
Integral Damper Actuator?
|
N.A.
|
|
Can controller accept occupant override from thermostat?
|
N.A.
|
|
Can controller accept occupancy sensor input?
|
N.A.
|
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
|
N.A.
|
|
External Communication Ports, Speeds and Access Devices
|
N.A.
|
|
Additional Information (Optional)
|
N.A.
|
|
Network Accessing Capabilities via Controller
|
|
|
Controller Access Devices
|
|
|
Zone-Based Interface Access
|
N.A.
|
|
Zone Interface Hardware
|
|
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e.
'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
|
|
Microprocessor(s)
|
N.A.
|
|
Clock Type
|
|
|
Clock Synchronization
|
N.A.
|
|
Volatile Memory (RAM) Capacity
|
N.A.
|
|
Volatile Memory (RAM) Uses
|
|
|
|
|
Is Volatile Memory Supported By Battery?
|
N.A.
|
|
Battery Type(s)
|
N.A.
|
|
Battery Life
|
N.A.
|
|
Backup Battery Operating Time
|
N.A.
|
|
Non-Volatile Memory Capacity (EEPROM/Flash)*
|
N.A.
|
|
Non-Volatile Memory Uses
|
|
|
Additional Information
|
N.A.
|
|
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly
impact system performance.
|
|
Can trend data be stored in this controller?
|
N.A.
|
|
How many total trend values can be stored?
|
N.A.
|
|
What is the controllers role in trending?
|
N.A.
|
|
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller?
|
N.A.
|
|
When full, does controller automatically send up trend data, overwrite data, or stop logging data?
|
N.A.
|
|
Programming Method(s)
|
N.A.
|
|
Resident vs Non-Resident Program Execution
|
N.A.
|
|
Scheduling
|
|
|
Resident Energy Management
|
|
|
Specific Pre-Programmed Algorithms Available
|
|
|
Additional Programming Functions
|
N.A.
|
|
DDC Loops (P, PI, PID)
|
N.A.
|
|
Automatic PID Tuning Feature
|
N.A.
|
|
Automatical-Dial Alarm Support
|
N.A.
|
|
Does controller perform multiple retries and buffer/store alarm until connection is made?
|
N.A.
|
|
Are multiple destinations possible?
|
N.A.
|
|
Upon controller power loss or hardware failure:
|
|
Are network communications affected?
|
N.A.
|
|
Is loss recognized on/by the network and alarm reported?
|
N.A.
|
|
DO and AO response?
|
|
|
Volatile memory functions?
|
|
|
Upon restoration of power does the controller:
|
|
Auto-reboot without operator intervention?
|
N.A.
|
|
Automatically reset/synchronize the clock?
|
N.A.
|
|
Update all monitored functions?
|
N.A.
|
|
Generate an alarm if backup battery is dead?
|
N.A.
|
|
Upon network or communications failure does controller:
|
|
Continue to operate standalone?
|
N.A.
|
|
Operate with last global settings or user-specified value?
|
N.A.
|
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
|
N.A.
|
|
Does network automatically reconfigure upon restoration?
|
N.A.
|
|
Does network store 'loss of communications' alarm with time of event?
|
N.A.
|
|
Additional Information (optional)
|
N.A.
|
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
|
|
Processor failure?
|
N.A.
|
|
Internal hardware failure?
|
N.A.
|
|
Open/shortened sensor?
|
N.A.
|
|
Others?
|
N.A.
|
|
|
|
Control Enclosure
|
N.A.
|
|
Power Supply Required
|
N.A.
|
|
Voltage
|
N.A.
|
|
VA
|
N.A.
|
|
Surge Protection
|
N.A.
|
|
Underwriters Laboratories
|
N.A.
|
|
FCC
|
N.A.
|
|
CE
|
N.A.
|
|
LonMark Certified
|
|
|
BACnet (BTL) Certified
|
|
|
Other
|
N.A.
|