DDC Online direct digital controls
Innotech - Maxim  

UM01, UM01C

Secondary Control Units
Date Last Saved: 9/20/2015 10:27:07 AM

Product Name(s): UM01, UM01C
Product Description: The Innotech MicroMAX Controller is a state of the art digital processing system that has the capability of controlling various types of industrial and commercial systems. The UM01 is designed to operate on an Innotech Sub System Network managed by the IG01 Sub System Gateway, allowing the UM01 to receive time synchronisation signals and store logged data. Alternatively, the UM01 can operated as a stand-alone unit on an Innotech primary Netcomm network; however in these applications the device will not have all of its features available. The UM01 features Universal I/O channels (UIO) which combine the functions of Universal Input and Analog Output channels into a single software programmable channel. Each UIO can be independently configured via software to have input or output functionality. With this structure, you are free to assign functions as required, instead of choosing a fixed controller to fit the job. The UM01 can be configured using the Windows® based MAXCon software. MAXCon allows the user to configure the internal processes of the UM01 controller by placing various process blocks and interconnecting lines to design the required control algorithm.
Product Application(s): Air conditioning and heating systems, lighting control, monitoring device, distributed I/O points controller, cold/freezer rooms.
Point Quantity Characteristics
Analog Input (AI): 1 Thermister input
Digital Input (DI): 0
Universal Input (AI or DI): 2 • Dry Digital Inputs
• Thermistor Inputs
• 0-10VDC
• LUX sensor input
• Dry Duty Cycle Inputs
• Dry Pulse Counter Inputs
• Voltage Pulse Counter Inputs
Analog Output (AO): 0
Digital Output (DO): 4 Triac output (24VAC)
Universal Output (UO): 2 0-10V Analog DC; PWM (0% to 100% duty cycle @ 13 HZ)
Other: 1 innTOUCH port on UM01C model only
A/D Converter Resolution
8 bit
10 bit
12 bit
16 bit
D/A Converter Resolution
6 bit
8 bit
10 bit
No Analog Output
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
Both AO and DO
DO Only
Indicating status LED on each output?
AO and DO
AO Only
DO Only
Integral Flow Sensor?
Integral Damper Actuator?
Can controller accept occupant override from thermostat?
Can controller accept occupancy sensor input?
Expander Boards
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
1 x RS485 serial communication port; User selectable Baud Rate: a. Innotech Net Comms 57600bps b. IG01 Sub System Gateway Comms 115200bps
External Communication Ports, Speeds and Access Devices RS485: 5 - way plug in connector for local/remote computer access. Also can communication to handheld Commissioning Tool (CT01).
Additional Information (Optional)
Network Accessing Capabilities via Controller
Access controller only
Access controller plus additional controllers on network segment / LAN
Access all controllers on system
No access available on this controller
Controller Access Devices
Local Display Panel (controller-mounted)
Local Display Panel (zone-mounted)
Handheld Interface Device (proprietary device)
PDA (3rd-Party HID)
Zone-Based port (details below)
Zone-Based Interface Access
Zone Interface Hardware
Zone-Mounted touchpad (thermostat or stand-alone display)
HID (proprietary device)
PDA (3rd party HID, with software)
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e. 'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
Functions Available Through Field Interface**:View ParamsChange ParamsChange
O&M SupportTAB/Cx Support
Local Display Panel (controller-mounted)
Local Display Panel (zone-mounted)
Handheld Interface Device (proprietary device)
PDA (3rd-Party HID)
Zone-Based port (details below)
Clock Type
Powered, battery-backed
Battery powered
Powered, no battery backing
Clock Synchronization No
Volatile Memory (RAM) Capacity
Volatile Memory (RAM) Uses
RAM use unrestricted
RAM use restricted as shown below
Information Not Provided
Program Execution / Calculation storage
Data / Trends / Alarms storage
Configuration / Parameter storage
Control Programming storage
Is Volatile Memory Supported By Battery? No
Battery Type(s)
Battery Life
Backup Battery Operating Time
Non-Volatile Memory Capacity (EEPROM/Flash)*
Non-Volatile Memory Uses
Data / Trends / Alarms / Calculation Storage
Configuration / Parameter Storage
Control Programming Storage
Controller Operating System
Additional Information
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly impact system performance.
Can trend data be stored in this controller?
How many total trend values can be stored?
What is the controllers role in trending?
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller?
When full, does controller automatically send up trend data, overwrite data, or stop logging data?
Programming Method(s) via MAXCon software
Resident vs Non-Resident Program Execution Resident
Resident/Supervisory. This controller supervises the scheduling of other controllers.
Resident/Stand Alone. This controller contains its own schedule.
Non-Resident. This controller is dependent upon another controller for its schedule.
None. This controller has no scheduling features.
Resident Energy Management
Energy management algorithms for this controller can be custom programmed
Pre-programmed/built-in algorithms available, and are fully editable using custom programming
Pre-Programmed/built-in with limited editing via template-based programming
Controller is not typically used for energy management functions
Specific Pre-Programmed Algorithms Available
None (custom programming only)
None (not applicable)
Optimal Start/Optimal Stop
Peak Demand Limiting/Load Shedding
Economizer (enthalpy, dry-bulb, CO2, modulating/2-position, etc.)
Additional Energy Management functions are resident at SI
Additional Programming Functions
DDC Loops (P, PI, PID) Yes
Automatic PID Tuning Feature No
Automatical-Dial Alarm Support
Does controller perform multiple retries and buffer/store alarm until connection is made?
Are multiple destinations possible?
Upon controller power loss or hardware failure:
Are network communications affected?
Is loss recognized on/by the network and alarm reported?
DO and AO response?
Outputs fail to a user pre-specified position
Outputs fail to a normal (unpowered) position
Outputs fail to last position
Volatile memory functions?
Retained for life of backup battery
Upon restoration of power does the controller:
Auto-reboot without operator intervention?
Automatically reset/synchronize the clock?
Update all monitored functions?
Generate an alarm if backup battery is dead?
Upon network or communications failure does controller:
Continue to operate standalone?
Operate with last global settings or user-specified value? N.A.
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
Does network automatically reconfigure upon restoration?
Does network store 'loss of communications' alarm with time of event?
Additional Information (optional)
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
Processor failure?
Internal hardware failure?
Open/shortened sensor?
Control Enclosure
Power Supply Required Yes
Voltage 24VAC ± 10% @ 50/60 Hz
VA 35VA with TRIAC load, 10VA without
Surge Protection
Underwriters Laboratories UL94-V0
FCC Title 47 CFR, Part 15 Class A
LonMark Certified
No - but LonWorks compatible
Information not provided
BACnet (BTL) Certified
Not submitted for testing
Information not provided