DDC Online direct digital controls
American Auto-Matrix - AspectFT  

Integra - IT-500, IT-600

Supervisory Interface Devices
Integra - IT500, IT600
Date Last Saved: 6/26/2015 1:38:26 PM

Product Name(s): Integra - IT-500, IT-600
Product Description: The IT500 and IT600 platforms offer complete high level functionality including alarming, trending, scheduling, and custom sequencing.
Product Application(s): Provide integration of common communication protocols with legacy systems.
Point Quantity Characteristics
Analog Input (AI): N.A. N.A.
Digital Input (DI): N.A. N.A.
Universal Input (AI or DI): N.A. N.A.
Analog Output (AO): N.A. N.A.
Digital Output (DO): N.A. N.A.
Universal Output (UO): N.A. N.A.
Other: N.A. N.A.
A/D Converter Resolution
D/A Converter Resolution
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
Indicating status LED on each output?
Integral Flow Sensor? N.A.
Integral Damper Actuator? N.A.
Can controller accept occupant override from thermostat? N.A.
Can controller accept occupancy sensor input? N.A.
Expander Boards N.A.
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
IT-500: (1) 10/100 Mb Ethernet port, IT-600: (2) 10/100 Mb Ethernet port
IT-500: (2) EIA-232 ports, IT-600: (1) EIA-232 port
IT-500: (4) EIA-485 ports, IT-600: (1) EIA-485 port, speeds up to 76.8 kbps
Optional LonWorks port - FTT-10
External Communication Ports, Speeds and Access Devices Auto-dial/auto-answer 56K modem
Additional Information (Optional)
Network Accessing Capabilities via Controller
Controller Access Devices
Zone-Based Interface Access N.A.
Zone Interface Hardware
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e. 'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
Microprocessor(s) IT-500: Motorola RISC Processor @ 250MHz
IT-600: PowerPC 440 524 MHz Processor
Clock Type
Powered, battery-backed
Battery powered
Powered, no battery backing
None
Other
Clock Synchronization Yes, selectable time servers
Volatile Memory (RAM) Capacity IT-500: 256 MB RAM
IT-600: 128 MB DDR RAM
Volatile Memory (RAM) Uses
RAM use unrestricted
RAM use restricted as shown below
Information Not Provided
Program Execution / Calculation storage
Data / Trends / Alarms storage
Configuration / Parameter storage
Control Programming storage
Others
Is Volatile Memory Supported By Battery? Yes for a predermined interval
Battery Type(s) Information not provided
Battery Life Battery is monitored and trickle charged while power is available to the Integra controller.
Backup Battery Operating Time Battery maintains processor operational for a predetermined interval. After interval has passed all data is written to flash memory and the processor is shutdown. Battery then maintains clock for 5 years minimum.
Non-Volatile Memory Capacity (EEPROM/Flash)* 128 MB Flash
Non-Volatile Memory Uses
Data / Trends / Alarms / Calculation Storage
Configuration / Parameter Storage
Control Programming Storage
Controller Operating System
Other
Additional Information
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly impact system performance.
Can trend data be stored in this controller? Yes
How many total trend values can be stored? Information not provided.
Dependant on available system resources.
What is the controllers role in trending? Log trend data, create reports
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller? Yes push & pull to/from supervisor
When full, does controller automatically send up trend data, overwrite data, or stop logging data? Overwrite data
Programming Method(s) N.A.
Resident vs Non-Resident Program Execution N.A.
Scheduling
Resident Energy Management
Specific Pre-Programmed Algorithms Available
Additional Programming Functions N.A.
DDC Loops (P, PI, PID) N.A.
Automatic PID Tuning Feature N.A.
Automatical-Dial Alarm Support N.A.
Does controller perform multiple retries and buffer/store alarm until connection is made? N.A.
Are multiple destinations possible? N.A.
Upon controller power loss or hardware failure:
Are network communications affected? N.A.
Is loss recognized on/by the network and alarm reported? N.A.
DO and AO response?
Volatile memory functions?
Upon restoration of power does the controller:
Auto-reboot without operator intervention? N.A.
Automatically reset/synchronize the clock? N.A.
Update all monitored functions? N.A.
Generate an alarm if backup battery is dead? N.A.
Upon network or communications failure does controller:
Continue to operate standalone? N.A.
Operate with last global settings or user-specified value? N.A.
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
N.A.
Does network automatically reconfigure upon restoration? N.A.
Does network store 'loss of communications' alarm with time of event? N.A.
Additional Information (optional) N.A.
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
Processor failure? N.A.
Internal hardware failure? N.A.
Open/shortened sensor? N.A.
Others? N.A.
 
Control Enclosure N.A.
Power Supply Required
Voltage IT-500,IT-600: 120VAC, 50/60Hz
IT-500i: 240VAC, 50/60Hz
VA 25 Max
Surge Protection No
Underwriters Laboratories UL standard 916
FCC Part 15 Class A
CE Yes
LonMark Certified
Yes
No
No - but LonWorks compatible
Information not provided
BACnet (BTL) Certified
Yes
No
Not submitted for testing
Information not provided BTL testing in progress
Other C-UL listed to Canadian Standards Association C22.2 No. 205-M1983 "Signal Equipment"

Programming Method(s)

(See also 'Software' Form)

Custom Sequencing

Scheduling

(See also 'Software' Form)

Resident/Supervisory. This controller supervises the scheduling of other controllers.

Resident/Stand Alone. This controller contains its own schedule.

Energy Management

SI-resident energy management functions/algorithms calculated and performed by this SI. One or more of these choices may be selected. 'No' indicates that it is not available.

Energy management algorithms for this controller can be custom programmed.
Pre-programmed/built-in algorithms available, and are fully editable using custom programming.
Pre-programmed/built-in with limited editing via template-based programming.
SI is not typically used for energy management functions
Other

Specific, pre-programmed algorithms available.

'No' indicates that it is not available.

None (custom programming only)
None (not applicable)
Optimal Start/Optimal Stop
Peak Demand Limiting/Load Shedding
Economizer
Additional Energy Management functions resident at individual controllers
Other
Hardware I/O Points 6 Universal Inputs and 4 Digital Relay Outputs
Additional SI Functions

Automatic-Dial Alarm Support

(See also 'Software' Form)

Automatic alarm emailing. No dial out.
Does SI perform multiple retries and buffer/store alarm until connection is made? Yes
Are multiple destinations possible? Yes, other hardware/software installs alarm console residing on PC, BACnet destinations.
 
Upon SI power loss or hardware failure:
Is loss recognized on/by the network and alarm reported? Yes
 
Upon restoration of power does the SI:
Auto-reboot without operator intervention? Yes
Automatically reset/synchronize its clock? Yes, if configured to use time server.
Automatically reset/synchronize its secondary network? Yes
Update all monitored functions? Yes
Generate an alarm if backup battery is dead? Yes
Control Enclosure Wall mounting