DDC Online direct digital controls
ASI Controls - ASIC  

JASIC-200; JASIC-600; JASIC-700

Supervisory Interface Devices
JASIC
Date Last Saved: 6/13/2013 3:03:55 PM

Product Name(s): JASIC-200; JASIC-600; JASIC-700
Product Description: Open integration controller with Web Interface.
Product Application(s): Control and integration of DDC systems ranging from small sites and remote buildings with the JASIC-200 to larger and more complex systems with the JASIC-700.
Point Quantity Characteristics
Analog Input (AI): N.A. N.A.
Digital Input (DI): N.A. N.A.
Universal Input (AI or DI): N.A. N.A.
Analog Output (AO): N.A. N.A.
Digital Output (DO): N.A. N.A.
Universal Output (UO): N.A. N.A.
Other: N.A. N.A.
A/D Converter Resolution
D/A Converter Resolution
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
Indicating status LED on each output?
Integral Flow Sensor? N.A.
Integral Damper Actuator? N.A.
Can controller accept occupant override from thermostat? N.A.
Can controller accept occupancy sensor input? N.A.
Expander Boards N.A.
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
(1) EIA-485 or (1) EIA-232, BACnet MS/TP or LonWorks
(2) Ethernet ports - (1-gigabit for JASIC-700) - BACnet/IP
External Communication Ports, Speeds and Access Devices (2) USB ports (USB 2.0 for JASIC-700)
Optional GPRS Modem Card
Additional Information (Optional)
Network Accessing Capabilities via Controller
Controller Access Devices
Zone-Based Interface Access N.A.
Zone Interface Hardware
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e. 'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
Microprocessor(s) JASIC-200: Power PC 405 EP 250 MHz Processor
JASIC-600: Power PC 440-Series 524 MHz Processor
JASIC-700: Power PC 440-Series 667 MHz Processor
Clock Type
Powered, battery-backed
Battery powered
Powered, no battery backing
None
Other
Clock Synchronization Information not provided
Volatile Memory (RAM) Capacity JASIC-200: 64 MB
JASIC-600: 128 MB
JASIC-700: 572 MB DDR-2
Volatile Memory (RAM) Uses
RAM use unrestricted
RAM use restricted as shown below
Information Not Provided
Program Execution / Calculation storage
Data / Trends / Alarms storage
Configuration / Parameter storage
Control Programming storage
Others
Is Volatile Memory Supported By Battery? Yes.
Battery Type(s) Information not provided.
Battery Life Information not provided.
Backup Battery Operating Time Saves configuration data for 'brief' power outages. Maintains real-time clock for up to one year.
Non-Volatile Memory Capacity (EEPROM/Flash)* JASIC-200: 64 MB Flash
JASIC-600: 128 MB Flash
JASIC-700: 1 GB Flash
Non-Volatile Memory Uses
Data / Trends / Alarms / Calculation Storage
Configuration / Parameter Storage
Control Programming Storage
Controller Operating System
Other Information not provided.
Additional Information
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly impact system performance.
Can trend data be stored in this controller? Information not provided.
How many total trend values can be stored? Information not provided.
What is the controllers role in trending? Information not provided.
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller?
When full, does controller automatically send up trend data, overwrite data, or stop logging data? Information not provided.
Programming Method(s) N.A.
Resident vs Non-Resident Program Execution N.A.
Scheduling
Resident Energy Management
Specific Pre-Programmed Algorithms Available
Additional Programming Functions N.A.
DDC Loops (P, PI, PID) N.A.
Automatic PID Tuning Feature N.A.
Automatical-Dial Alarm Support N.A.
Does controller perform multiple retries and buffer/store alarm until connection is made? N.A.
Are multiple destinations possible? N.A.
Upon controller power loss or hardware failure:
Are network communications affected? N.A.
Is loss recognized on/by the network and alarm reported? N.A.
DO and AO response?
Volatile memory functions?
Upon restoration of power does the controller:
Auto-reboot without operator intervention? N.A.
Automatically reset/synchronize the clock? N.A.
Update all monitored functions? N.A.
Generate an alarm if backup battery is dead? N.A.
Upon network or communications failure does controller:
Continue to operate standalone? N.A.
Operate with last global settings or user-specified value? N.A.
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
N.A.
Does network automatically reconfigure upon restoration? N.A.
Does network store 'loss of communications' alarm with time of event? N.A.
Additional Information (optional) N.A.
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
Processor failure? N.A.
Internal hardware failure? N.A.
Open/shortened sensor? N.A.
Others? N.A.
 
Control Enclosure N.A.
Power Supply Required
Voltage 15 VDC
VA
Surge Protection
Underwriters Laboratories UL-916
FCC Meets FCC Requirements.
CE Meets CE Requirements
LonMark Certified
Yes
No
No - but LonWorks compatible
Information not provided
BACnet (BTL) Certified
Yes JASIC-700 with optional BACnet driver
No
Not submitted for testing
Information not provided
Other

Programming Method(s)

(See also 'Software' Form)

JASIC controllers run industry standard Tridium Niagara framework. Configured using ASI Visual Expert Software.

Scheduling

(See also 'Software' Form)

Resident Scheduling and supervision of other controllers.

Energy Management

SI-resident energy management functions/algorithms calculated and performed by this SI. One or more of these choices may be selected. 'No' indicates that it is not available.

Energy management algorithms for this controller can be custom programmed.
Pre-programmed/built-in algorithms available, and are fully editable using custom programming.
Pre-programmed/built-in with limited editing via template-based programming.
SI is not typically used for energy management functions
Other Information not provided.

Specific, pre-programmed algorithms available.

'No' indicates that it is not available.

None (custom programming only)
None (not applicable)
Optimal Start/Optimal Stop
Peak Demand Limiting/Load Shedding
Economizer
Additional Energy Management functions resident at individual controllers
Other Information not provided.
Hardware I/O Points None.
Additional SI Functions

Automatic-Dial Alarm Support

(See also 'Software' Form)

Information not provided.
Does SI perform multiple retries and buffer/store alarm until connection is made? Information not provided.
Are multiple destinations possible? Information not provided.
 
Upon SI power loss or hardware failure:
Is loss recognized on/by the network and alarm reported? Information not provided.
 
Upon restoration of power does the SI:
Auto-reboot without operator intervention? Information not provided.
Automatically reset/synchronize its clock? Information not provided.
Automatically reset/synchronize its secondary network? Information not provided.
Update all monitored functions? Information not provided.
Generate an alarm if backup battery is dead? Information not provided.
Control Enclosure Provided