DDC Online direct digital controls
Trane - Tracker Light Commercial System  

Central Control Panel (CCP)

Primary Control Unit
Central Control Panel
Date Last Saved: 7/17/2006 9:59:15 AM

Product Name(s): Central Control Panel (CCP)
Product Description: The Central Control Panel (CCP) coordinates the components of a changeover-bypass zoning or VAV system.
Product Application(s): The CCP coordinates and monitors VariTrac system operations including; HVAC system supply pressure and airflow, heating/cooling mode, supply air temperature, all zone temperatures and setpoints, fan mode, economizer position when paired with CO2 demand controlled ventilation, time-of-day scheduling, zone grouping logic and system override (after hours operation).
Point Quantity Characteristics
Analog Input (AI): 0
Digital Input (DI): 3 Predefined Inputs:
- Priority Shutdown
- Time
- Occupancy
Universal Input (AI or DI): 0
Analog Output (AO): 0 Predefined Outputs:
- 2-stage heat
- 2-stage cool
- Fan
- Occupancy
Digital Output (DO): 4 Information not provided
Universal Output (UO): 0
Other: 0
Control Unit Model #:AIDIUIDOAOUOOther
CCP 3 4
A/D Converter Resolution
8 bit
10 bit
12 bit
16 bit
Other
D/A Converter Resolution
6 bit
8 bit
10 bit
No Analog Output
Other
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
No
Both AO and DO
DO Only
Other
Indicating status LED on each output?
No
AO and DO
AO Only
DO Only
Other
Integral Flow Sensor? N.A.
Integral Damper Actuator? N.A.
Can controller accept occupant override from thermostat? N.A.
Can controller accept occupancy sensor input? N.A.
Expander Boards N.A.
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
(1) - LonTalk TP/FT-10A (Trane Comm5, proprietary)
(1) - Trane Comm4, proprietary
External Communication Ports, Speeds and Access Devices (1) - RS-232 serial port for laptop
Additional Information (Optional)
Network Accessing Capabilities via Controller
Access controller only
Access controller plus additional controllers on network segment / LAN
Access all controllers on system
No access available on this controller
Other
Controller Access Devices
Laptop/PC
Local Display Panel (controller-mounted)
Local Display Panel (zone-mounted)
Handheld Interface Device (proprietary device)
PDA (3rd-Party HID)
Zone-Based port (details below)
Other
Zone-Based Interface Access
Zone Interface Hardware
Zone-Mounted touchpad (thermostat or stand-alone display)
HID (proprietary device)
PDA (3rd party HID, with software)
Laptop/PC
none
Other
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e. 'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
Functions Available Through Field Interface**:View ParamsChange ParamsChange
Programs/Logic
O&M SupportTAB/Cx Support
Laptop/PC
Local Display Panel (controller-mounted)
Local Display Panel (zone-mounted)
Handheld Interface Device (proprietary device)
PDA (3rd-Party HID)
Zone-Based port (details below)
Other
Microprocessor(s) Motorola 6833 32 bit processor
Clock Type
Powered, battery-backed
Battery powered
Powered, no battery backing
None
Other Super-capacitor backed
Clock Synchronization Information not provided
Volatile Memory (RAM) Capacity SRAM - 1MB
Volatile Memory (RAM) Uses
RAM use unrestricted
RAM use restricted as shown below
Information Not Provided
Program Execution / Calculation storage
Data / Trends / Alarms storage
Configuration / Parameter storage
Control Programming storage
Others
Is Volatile Memory Supported By Battery? Super-capacitor backed
Battery Type(s) Super-capacitor
Battery Life The super-capacitor is good for the life of the controller.
Backup Battery Operating Time The super-capacitor will hold a charge for up to five days.
Non-Volatile Memory Capacity (EEPROM/Flash)* FLASH - 2 MB
EEPROM - 512 KB
Non-Volatile Memory Uses
Data / Trends / Alarms / Calculation Storage
Configuration / Parameter Storage
Control Programming Storage
Controller Operating System
Other
Additional Information
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly impact system performance.
Can trend data be stored in this controller? No
How many total trend values can be stored? N.A.
What is the controllers role in trending? N.A.
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller? N.A.
When full, does controller automatically send up trend data, overwrite data, or stop logging data? N.A.
Programming Method(s) The CCP auto configures upon being powered. The CCP discovers all controllers on the link and starts with factory set defaults. The CCP is edited by using any of the following:
- software included with the unit
- the optional local display if present
- an upper system controller, Tracker BMTK, if present
Resident vs Non-Resident Program Execution Resident
Scheduling
Resident/Supervisory. This controller supervises the scheduling of other controllers.
Resident/Stand Alone. This controller contains its own schedule.
Non-Resident. This controller is dependent upon another controller for its schedule.
None. This controller has no scheduling features.
Other
Resident Energy Management
Energy management algorithms for this controller can be custom programmed
Pre-programmed/built-in algorithms available, and are fully editable using custom programming
Pre-Programmed/built-in with limited editing via template-based programming
Controller is not typically used for energy management functions
Others
Specific Pre-Programmed Algorithms Available
None (custom programming only)
None (not applicable)
Optimal Start/Optimal Stop
Peak Demand Limiting/Load Shedding
Economizer (enthalpy, dry-bulb, CO2, modulating/2-position, etc.)
Other
Additional Energy Management functions are resident at SI
Additional Programming Functions
DDC Loops (P, PI, PID) No
Automatic PID Tuning Feature No
Automatical-Dial Alarm Support No
Does controller perform multiple retries and buffer/store alarm until connection is made? No
Are multiple destinations possible? No
Upon controller power loss or hardware failure:
Are network communications affected? No
Is loss recognized on/by the network and alarm reported? Yes; when part of the Network it is reported to Tracker.
DO and AO response?
Outputs fail to a user pre-specified position
Outputs fail to a normal (unpowered) position
Outputs fail to last position
Other
Volatile memory functions?
Lost
Retained for life of backup battery
Other
Upon restoration of power does the controller:
Auto-reboot without operator intervention? Yes
Automatically reset/synchronize the clock? Yes, if operator display is present.
Update all monitored functions? Yes
Generate an alarm if backup battery is dead? N.A.
Upon network or communications failure does controller:
Continue to operate standalone? Yes
Operate with last global settings or user-specified value? N.A.
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
Yes
Does network automatically reconfigure upon restoration? Yes
Does network store 'loss of communications' alarm with time of event? Yes
Additional Information (optional)
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
Processor failure? Yes
Internal hardware failure? Yes
Open/shortened sensor? No
Others?
 
Control Enclosure NEMA-1 plenum rated
Power Supply Required
Voltage 20-30 VAC
60 Hz
VA 30 VA minimum
Class 2 transformer required
Surge Protection Meets CE surge requirements for industrial environments
Underwriters Laboratories UL Energy Management Equipment 834Y
FCC Information not provided.
CE Immunity:
• EN61326-1:1997 +A1

Emissions:
• EN50081-1:1998
• EN55022: 1998 Class B limit
LonMark Certified
Yes
No
No - but LonWorks compatible
Information not provided
BACnet (BTL) Certified
Yes
No
Not submitted for testing
Information not provided
Other