BTI-100
Supervisory Interface Devices
BTI-100
Date Last Saved: 6/25/2015 8:06:16 PM
|
Product Name(s):
|
BTI-100
|
|
Product Description:
|
The BTI-100 is a BACnet compliant global controller that connects to a BACnet Ethernet network and supports field controllers on a single BACnet MS/TP LAN. The BTI-100 can operate in a stand-alone capacity and is BACnet/IP capable.
|
|
Product Application(s):
|
The BTI-100 is a BACnet compliant global controller for smaller installations (up to 65 VLCs)
|
|
|
Point Quantity
|
Characteristics
|
|
Analog Input (AI):
|
N.A.
|
N.A.
|
|
Digital Input (DI):
|
N.A.
|
N.A.
|
|
Universal Input (AI or DI):
|
N.A.
|
N.A.
|
|
Analog Output (AO):
|
N.A.
|
N.A.
|
|
Digital Output (DO):
|
N.A.
|
N.A.
|
|
Universal Output (UO):
|
N.A.
|
N.A.
|
|
Other:
|
N.A.
|
N.A.
|
|
|
|
A/D Converter Resolution
|
|
|
D/A Converter Resolution
|
|
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
|
|
|
Indicating status LED on each output?
|
|
|
Integral Flow Sensor?
|
N.A.
|
|
Integral Damper Actuator?
|
N.A.
|
|
Can controller accept occupant override from thermostat?
|
N.A.
|
|
Can controller accept occupancy sensor input?
|
N.A.
|
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
|
(1) - BACnet/IP or BACnet/Ethernet port to primary network @ 10/100 Mbps
(1) - BACnet MS/TP ports to secondary network @ 9.6 - 76.8 kbps (polling; alternate use)
|
|
External Communication Ports, Speeds and Access Devices
|
(1) - EIA-232 port using BACnet/PTP @ 57.6 kbps; To: Laptop/PC for device configuration (Alerton AC-2650 cable required)
(1) - Connection available for external modem.
|
|
Additional Information (Optional)
|
|
|
Network Accessing Capabilities via Controller
|
|
|
Controller Access Devices
|
|
|
Zone-Based Interface Access
|
N.A.
|
|
Zone Interface Hardware
|
|
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e.
'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
|
|
Microprocessor(s)
|
Motorola 32-bit high integration CPU
|
|
Clock Type
|
|
|
Clock Synchronization
|
Synched up via standard BACnet Time_Synchronization message by OWS, or by any device which can transmit standard BACnet Time_Synch.
|
|
Volatile Memory (RAM) Capacity
|
32MB
|
|
Volatile Memory (RAM) Uses
|
|
|
|
|
Is Volatile Memory Supported By Battery?
|
Yes
|
|
Battery Type(s)
|
7.2V NiCad battery
|
|
Battery Life
|
Information not provided
|
|
Backup Battery Operating Time
|
500mA-h
|
|
Non-Volatile Memory Capacity (EEPROM/Flash)*
|
8MB
|
|
Non-Volatile Memory Uses
|
|
|
Additional Information
|
|
|
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly
impact system performance.
|
|
Can trend data be stored in this controller?
|
Yes
|
|
How many total trend values can be stored?
|
320 trend log objects
|
|
What is the controllers role in trending?
|
Information not provided
|
|
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller?
|
|
|
When full, does controller automatically send up trend data, overwrite data, or stop logging data?
|
Information not provided
|
|
Programming Method(s)
|
N.A.
|
|
Resident vs Non-Resident Program Execution
|
N.A.
|
|
Scheduling
|
|
|
Resident Energy Management
|
|
|
Specific Pre-Programmed Algorithms Available
|
|
|
Additional Programming Functions
|
N.A.
|
|
DDC Loops (P, PI, PID)
|
N.A.
|
|
Automatic PID Tuning Feature
|
N.A.
|
|
Automatical-Dial Alarm Support
|
N.A.
|
|
Does controller perform multiple retries and buffer/store alarm until connection is made?
|
N.A.
|
|
Are multiple destinations possible?
|
N.A.
|
|
Upon controller power loss or hardware failure:
|
|
Are network communications affected?
|
N.A.
|
|
Is loss recognized on/by the network and alarm reported?
|
N.A.
|
|
DO and AO response?
|
|
|
Volatile memory functions?
|
|
|
Upon restoration of power does the controller:
|
|
Auto-reboot without operator intervention?
|
N.A.
|
|
Automatically reset/synchronize the clock?
|
N.A.
|
|
Update all monitored functions?
|
N.A.
|
|
Generate an alarm if backup battery is dead?
|
N.A.
|
|
Upon network or communications failure does controller:
|
|
Continue to operate standalone?
|
N.A.
|
|
Operate with last global settings or user-specified value?
|
N.A.
|
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
|
N.A.
|
|
Does network automatically reconfigure upon restoration?
|
N.A.
|
|
Does network store 'loss of communications' alarm with time of event?
|
N.A.
|
|
Additional Information (optional)
|
N.A.
|
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
|
|
Processor failure?
|
N.A.
|
|
Internal hardware failure?
|
N.A.
|
|
Open/shortened sensor?
|
N.A.
|
|
Others?
|
N.A.
|
|
|
|
Control Enclosure
|
N.A.
|
|
Power Supply Required
|
|
|
Voltage
|
24 Vac
|
|
VA
|
(10 VA)
|
|
Surge Protection
|
|
|
Underwriters Laboratories
|
UL 916 PAZX (Energy Management)
|
|
FCC
|
Part 15, Sub-Part J, Class A
|
|
CE
|
EMC Directive 89/336/EEC (European CE Mark)
|
|
LonMark Certified
|
|
|
BACnet (BTL) Certified
|
|
|
Other
|
|
|
Programming Method(s)
(See also 'Software' Form)
|
Envision for BACtalk global controller DDC or VisualLogic
|
|
Scheduling
(See also 'Software' Form)
|
Resident/Supervisory. This controller supervises the scheduling of other controllers.
|
|
Energy Management
SI-resident energy management functions/algorithms calculated and performed
by this SI. One or more of these choices may be selected. 'No' indicates that it
is not available.
|
|
|
Specific, pre-programmed algorithms available.
'No' indicates that it is not available.
|
|
|
Hardware I/O Points
|
N.A.
|
|
Additional SI Functions
|
|
|
Automatic-Dial Alarm Support
(See also 'Software' Form)
|
Information not provided
|
|
Does SI perform multiple retries and buffer/store alarm until connection is
made?
|
Information not provided
|
|
Are multiple destinations possible?
|
Information not provided
|
|
|
|
Upon SI power loss or hardware failure:
|
|
Is loss recognized on/by the network and alarm reported?
|
Information not provided
|
|
|
|
Upon restoration of power does the SI:
|
|
Auto-reboot without operator intervention?
|
Information not provided
|
|
Automatically reset/synchronize its clock?
|
Information not provided
|
|
Automatically reset/synchronize its secondary network?
|
Information not provided
|
|
Update all monitored functions?
|
Information not provided
|
|
Generate an alarm if backup battery is dead?
|
Information not provided
|
|
Control Enclosure
|
|