DDC Online direct digital controls
Teletrol - Integrator  [Archived]

Teletrol Network Router

Communications Interface Devices
Teletrol Network Router
Date Last Saved: 5/18/2004 1:42:37 PM

Product Name(s): Teletrol Network Router
Product Description: The Teletrol Network Router (TNR) communicates via the same network that connects other computer systems in a facility. This allows the operator to communicate with the entire system via the network. Each TNR interfaces a system segment to an enterprise-wide network and acting as a node provides communication to all of the controllers on a system segment. Up to 254 TNR's can be connected to the network, each supporting a segment of up to 99 Teletrol controllers.
Product Application(s): The Teletrol Network Router is used to provide wide-area networking features and to integrate the Teletrol system for implememtation of large systems.
Point Quantity Characteristics
Analog Input (AI): N.A. N.A.
Digital Input (DI): N.A. N.A.
Universal Input (AI or DI): N.A. N.A.
Analog Output (AO): N.A. N.A.
Digital Output (DO): N.A. N.A.
Universal Output (UO): N.A. N.A.
Other: N.A. N.A.
A/D Converter Resolution
D/A Converter Resolution
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
Indicating status LED on each output?
Integral Flow Sensor? N.A.
Integral Damper Actuator? N.A.
Can controller accept occupant override from thermostat? N.A.
Can controller accept occupancy sensor input? N.A.
Expander Boards N.A.
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
N.A.
External Communication Ports, Speeds and Access Devices N.A.
Additional Information (Optional) N.A.
Network Accessing Capabilities via Controller
Controller Access Devices
Zone-Based Interface Access N.A.
Zone Interface Hardware
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e. 'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
Microprocessor(s) N.A.
Clock Type
Clock Synchronization N.A.
Volatile Memory (RAM) Capacity N.A.
Volatile Memory (RAM) Uses
Is Volatile Memory Supported By Battery? N.A.
Battery Type(s) N.A.
Battery Life N.A.
Backup Battery Operating Time N.A.
Non-Volatile Memory Capacity (EEPROM/Flash)* N.A.
Non-Volatile Memory Uses
Additional Information N.A.
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly impact system performance.
Can trend data be stored in this controller? N.A.
How many total trend values can be stored? N.A.
What is the controllers role in trending? N.A.
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller? N.A.
When full, does controller automatically send up trend data, overwrite data, or stop logging data? N.A.
Programming Method(s) N.A.
Resident vs Non-Resident Program Execution N.A.
Scheduling
Resident Energy Management
Specific Pre-Programmed Algorithms Available
Additional Programming Functions N.A.
DDC Loops (P, PI, PID) N.A.
Automatic PID Tuning Feature N.A.
Automatical-Dial Alarm Support N.A.
Does controller perform multiple retries and buffer/store alarm until connection is made? N.A.
Are multiple destinations possible? N.A.
Upon controller power loss or hardware failure:
Are network communications affected? N.A.
Is loss recognized on/by the network and alarm reported? N.A.
DO and AO response?
Volatile memory functions?
Upon restoration of power does the controller:
Auto-reboot without operator intervention? N.A.
Automatically reset/synchronize the clock? N.A.
Update all monitored functions? N.A.
Generate an alarm if backup battery is dead? N.A.
Upon network or communications failure does controller:
Continue to operate standalone? N.A.
Operate with last global settings or user-specified value? N.A.
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
N.A.
Does network automatically reconfigure upon restoration? N.A.
Does network store 'loss of communications' alarm with time of event? N.A.
Additional Information (optional) N.A.
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
Processor failure? N.A.
Internal hardware failure? N.A.
Open/shortened sensor? N.A.
Others? N.A.
 
Control Enclosure N.A.
Power Supply Required N.A.
Voltage N.A.
VA N.A.
Surge Protection N.A.
Underwriters Laboratories N.A.
FCC N.A.
CE N.A.
LonMark Certified
BACnet (BTL) Certified
Other N.A.