DDC Online direct digital controls
Johnson Controls - Metasys Extended Architecture  

FX05 Field Controller

Secondary Control Units
FX05 Field Controller
Date Last Saved: 12/22/2006 4:06:33 PM

Product Name(s): FX05 Field Controller
Product Description: The FX05 Series controllers are compact field controllers in the Facility Explorer range of products. The controller has 16 physical inputs and outputs and supports a wide range of temperature sensors and actuating devices.
Product Application(s): The controller is designed specifically for commercial Heating, Ventilating, and Air Conditionining (HVAC) and Refrigeration applications. A series of converter modules extends the range of inputs to active sensors for the measurement of humidity, pressure, and other variables.
Point Quantity Characteristics
Analog Input (AI): 4 RTD
Digital Input (DI): 5 Voltage free contacts
Universal Input (AI or DI): N.A.
Analog Output (AO): 1 0 - 10 VDC
5 mA
Digital Output (DO): 6 SPST 5A Relays,
250 VAC power relay
5A/24 VAC triacs
Universal Output (UO): N.A.
Other: N.A.
Control Unit Model #:AIDIUIDOAOUOOther
LP-FX05P11-002C 4 5 6 1
LP-FX05N11-002C 4 5 6 1
LP-FX05L11-002C 4 5 6 1
LP-FX05P11-012C 4 5 6 1
LP-FX05N11-012C 4 5 6 1
LP-FX05L11-012C 4 5 6 1
LP-FX05P11-022C 4 5 6 1
LP-FX05N11-022C 4 5 6 1
LP-FX05L11-022C 4 5 6 1
LP-FX05P12-002C 4 5 6 1
LP-FX05N12-002C 4 5 6 1
LP-FX05L12-002C 4 5 6 1
LP-FX05P12-012C 4 5 6 1
LP-FX05N12-012C 4 5 6 1
LP-FX05L12-012C 4 5 6 1
LP-FX05P12-002C 4 5 6 1
LP-FX05N12-022C 4 5 6 1
LP-FX05L12-022C 4 5 6 1
LP-FX05P13-002C 4 5 6 1
LP-FX05N13-002C 4 5 6 1
LP-FX05L13-002C 4 5 6 1
LP-FX05P13-012C 4 5 6 1
LP-FX05N13-012C 4 5 6 1
LP-FX05L13-012C 4 5 6 1
LP-FX05P13-022C 4 5 6 1
LP-FX05N13-022C 4 5 6 1
LP-FX05L13-022C 4 5 6 1
A/D Converter Resolution
8 bit
10 bit
12 bit
16 bit
D/A Converter Resolution
6 bit
8 bit
10 bit
No Analog Output
Other 16 bit resolution
HOA switches provided on each output?
Note: These are also available as an add-on from 3rd party vendors.
Both AO and DO
DO Only
Indicating status LED on each output?
AO and DO
AO Only
DO Only
Integral Flow Sensor? N/A
Integral Damper Actuator? N/A
Can controller accept occupant override from thermostat? N/A
Can controller accept occupancy sensor input? N/A
Expander Boards
Network Ports, Protocol(s), and Speed(s) Supported
(Note: See 'Architecture' for network details)
Differs based on model #. Each model has one of the following two:
- Proprietary N2, 9.6 Kbps
- LonWorks, 78.6 Kbps
External Communication Ports, Speeds and Access Devices Molex Connectors

Relay Outputs: Mini-Fit family, Series 5569 94V-2, mates with 5557 dual low receptacle, terminals Series 5556, cables AWG 18.

Low voltage I/O's: Series 5268-NA, mates with 5264-N terminal housing, terminals Series 5263, cables AWG22
Additional Information (Optional)
Network Accessing Capabilities via Controller
Access controller only
Access controller plus additional controllers on network segment / LAN
Access all controllers on system
No access available on this controller
Controller Access Devices
Local Display Panel (controller-mounted)
Local Display Panel (zone-mounted)
Handheld Interface Device (proprietary device)
PDA (3rd-Party HID)
Zone-Based port (details below)
Zone-Based Interface Access Available:

The controller also supports a Room Command Module (RCM). The RCM features an onboard adjustment dial that allows the occupants to perform setpoint or warm/cool adjustment capabilities, depending on the model.
Zone Interface Hardware
Zone-Mounted touchpad (thermostat or stand-alone display)
HID (proprietary device)
PDA (3rd party HID, with software)
*Note: This section covers the capabilities for accessing the controller or other parts of the network from the controller (i.e. 'bottom-up').
Standard access functionality is covered in the Architecture and Software sections.
**Does NOT include front-end OI functions. See vendor for specific functions available.
Functions Available Through Field Interface**:View ParamsChange ParamsChange
O&M SupportTAB/Cx Support
Local Display Panel (controller-mounted)
Local Display Panel (zone-mounted)
Handheld Interface Device (proprietary device)
PDA (3rd-Party HID)
Zone-Based port (details below)
Microprocessor(s) Information not provided.
Clock Type
Powered, battery-backed
Battery powered
Powered, no battery backing
Clock Synchronization Information not provided.
Volatile Memory (RAM) Capacity Information not provided.
Volatile Memory (RAM) Uses
RAM use unrestricted
RAM use restricted as shown below
Information Not Provided
Program Execution / Calculation storage
Data / Trends / Alarms storage
Configuration / Parameter storage
Control Programming storage
Others Information not provided
Is Volatile Memory Supported By Battery? Information not provided.
Battery Type(s) Information not provided.
Battery Life Information not provided.
Backup Battery Operating Time Information not provided.
Non-Volatile Memory Capacity (EEPROM/Flash)* Information not provided.
Non-Volatile Memory Uses
Data / Trends / Alarms / Calculation Storage
Configuration / Parameter Storage
Control Programming Storage
Controller Operating System
Other Information not provided
Additional Information
* Items in NV memory are not lost upon power or battery failure. Other types of NV memory such as EPROM, NOVROM, etc. do not directly impact system performance.
Can trend data be stored in this controller? Information not provided.
How many total trend values can be stored? Information not provided.
What is the controllers role in trending? Information not provided.
Can controller be programmed to 'push' data to archive or are trends 'pulled' from controller? Information not provided.
When full, does controller automatically send up trend data, overwrite data, or stop logging data? Information not provided.
Programming Method(s) FX Tools is a software suite used to program, download, test, and commision the Facility Explorer devices, including the FX05 field controller. You can download the application to the controller via PC with FX Tools or you can upload or download the application via the FX Programming Key (a proprietary hand-held device).
Resident vs Non-Resident Program Execution Resident
Resident/Supervisory. This controller supervises the scheduling of other controllers.
Resident/Stand Alone. This controller contains its own schedule.
Non-Resident. This controller is dependent upon another controller for its schedule.
None. This controller has no scheduling features.
Resident Energy Management
Energy management algorithms for this controller can be custom programmed
Pre-programmed/built-in algorithms available, and are fully editable using custom programming
Pre-Programmed/built-in with limited editing via template-based programming
Controller is not typically used for energy management functions
Specific Pre-Programmed Algorithms Available
None (custom programming only)
None (not applicable)
Optimal Start/Optimal Stop
Peak Demand Limiting/Load Shedding
Economizer (enthalpy, dry-bulb, CO2, modulating/2-position, etc.)
Additional Energy Management functions are resident at SI
Additional Programming Functions Although not provided with the system software, common energy management applications are typically provided by the vendor’s field technicians.
DDC Loops (P, PI, PID) Information Not Provided
Automatic PID Tuning Feature Information Not Provided
Automatical-Dial Alarm Support Information Not Provided
Does controller perform multiple retries and buffer/store alarm until connection is made? Information Not Provided
Are multiple destinations possible? Information Not Provided
Upon controller power loss or hardware failure:
Are network communications affected? Information Not Provided
Is loss recognized on/by the network and alarm reported? Information Not Provided
DO and AO response?
Outputs fail to a user pre-specified position
Outputs fail to a normal (unpowered) position
Outputs fail to last position
Other Information not provided
Volatile memory functions?
Retained for life of backup battery
Other Information not provided
Upon restoration of power does the controller:
Auto-reboot without operator intervention? Information Not Provided
Automatically reset/synchronize the clock? Information Not Provided
Update all monitored functions? Information Not Provided
Generate an alarm if backup battery is dead? Information Not Provided
Upon network or communications failure does controller:
Continue to operate standalone? Information Not Provided
Operate with last global settings or user-specified value? N.A.
Do broken network segments continue to communicate within the remaining segment?
(Note: May depend on proper termination of segments for higher speed networks.)
Information Not Provided
Does network automatically reconfigure upon restoration? Information Not Provided
Does network store 'loss of communications' alarm with time of event? Information Not Provided
Additional Information (optional) Information Not Provided
Self Test Diagnostics
Does controller have internal self-test diagnostics to check:
Processor failure? Information Not Provided
Internal hardware failure? Information Not Provided
Open/shortened sensor? Information Not Provided
Control Enclosure Information Not Provided
Power Supply Required
Voltage 24 VAC/VDC +/- 15%, 50/60 Hz
Surge Protection Surge protection available as option from vendor.
Underwriters Laboratories UL 916
UL 873
FCC FCC Compliant to CFR 47, Part 15, subpart B, Class A
LonMark Certified
No - but LonWorks compatible
Information not provided
BACnet (BTL) Certified
Not submitted for testing
Information not provided