DDC Online direct digital controls
Solidyne - SLN System  

System Architecture

Date Last Saved: 7/12/2005 3:22:43 PM

This section distinguishes between Operator Interfaces and Field Interfaces to the BAS. The Operator Interface refers to the main 'front-end' method for accessing and operating the BAS. The Field Interfaces typically access the BAS from the controller-level and have limited functionality, and may include HID, LDP, and ZBI as described below. This section describes the devices only; OI functionality is generally covered in the Software, while Field Interface functionality is detailed further in the individual Controllers
Operator Interfaces (OI)
Dedicated Operator Workstation (OWS)
Dedicated PC(s) with proprietary workstation software
By using the SLN-ADP1 from a third party vendor.
"Thin" Client Browser PC using Microsoft Internet Explorer or Netscape Navigator
"Thick" Client Browser An operator workstation using SLN-WPT software.
Product Application(s): N.A.
Handheld Interface Devices (HID)
PDA-Based N.A.
Proprietary N.A.
Local Display Panel (LDP) N.A.
Zone Based Interfaces (ZBI)
Thermostat with communication port to access local controller/network S-link for connection to WTSx sensor.
Other thermostat types available (without communication ports)
Interface to BAS Networks The SLN System uses third party controllers to interface with the Internet/IT network.
Compatible with the building's IT network? Yes see above
Protocol(s) LonTalk
Cabling and Speeds 78.6 Kbps
Expansion Capability Information not provided
Additional Information
Peer-to-Peer or Polling? N.A.
Protocol(s) N.A.
Cabling and Speeds N.A.
Expansion Capability N.A.
Additional Information
Includes a listing of available Gateways, Routers and other devices that provide additional communications flexibility into and out of the BAS. Repeaters, bridges, standard modems and the like are typically not included here. Note: If in use by the BAS, the Internet/building IT Network is extremely open and non-proprietary. If a vendor uses the IT Network, CI devices such as IP routers and hubs can be purchased from third parties.
Model (Device) Application
Model (Device) Third party contollers
Application The third part controllers are a presentation system for LonWorks networks. It allows clients to use a standard web browser to view and control devices via the Internet or local intranet.
Classification Router
between
IT
and
Primary Network (LonTalk)
Additional Information